Unleash the Rally Spirit: Toyota GR Yaris CTE RACING Carbon Ceramic Brake Kit

The Toyota GR Yaris is a masterpiece of rally-bred engineering. However, for drivers pushing the limits on track or technical mountain roads, managing heat and weight is crucial. The CTE RACING Carbon Ceramic Brake (CCM) Kit (Part No. CBK02019) is designed to transform the GR Yaris into an even more agile and unstoppable machine.

1. Drastic Weight Reduction: Sharpening the "Pocket Rocket"

The GR Yaris is defined by its lightweight, AWD agility. Reducing unsprung mass is the single most effective way to enhance its handling.

  • The Advantage: The 360x32mm Carbon Ceramic discs are approximately 50% lighter than the factory steel rotors.
  • The Impact: Removing significant rotating mass from the front axle allows the suspension to react with lightning speed. You will experience sharper turn-in, reduced understeer, and a noticeably more playful chassis balance.

2. Front 2F16L Monobloc Calipers: High-Rigidity Precision

  • Racing Architecture: The CTE RACING Monobloc calipers are machined from high-strength aluminum for maximum rigidity. This eliminates the "spongy" pedal feel often found in multi-piece calipers under extreme heat.
  • Optimal Clamping: Paired with the 360mm discs, this system provides immense stopping power and incredibly linear modulation, allowing you to trail-brake into corners with absolute confidence.

3. Mastering the Heat: Zero Fade on Track

  • Thermal Endurance: The 360x32mm CCM discs are built to withstand temperatures over 1,000°C. While steel discs can warp or fade during repetitive high-speed stops on track, CTE RACING CCM maintains a consistent friction coefficient.
  • D65 Specification: The specific D65 air-vane design ensures rapid heat dissipation, protecting your hubs and wheel bearings from thermal stress during long sessions.

4. Pure Performance Aesthetics & Low Maintenance

  • Zero Brake Dust: Keep your white or matte-finished GR wheels pristine. CCM material produces virtually no black dust, maintaining that "fresh off the stage" look.
  • No Rust: Unlike traditional high-performance brakes, these rotors will not develop surface rust after a car wash or in humid conditions, ensuring they always look as sharp as they perform.

GR Yaris CTE RACING Technical Specifications (CBK02019)

Component
Specification
Key Benefit
Front Calipers
Monobloc High-Performance
Maximum rigidity and consistent pedal feel.
Front Rotors
360x32mm (CCM)
50% lighter than steel; extreme heat resistance.
Vane Design
D65 Internal Ventilation
Direct OEM replacement; retains full EPB function.
Brake Dust
Minimal to Zero
Keeps forged lightweight wheels clean.